Floor Tiles Cape Town

How to Remove Tiles Easily and Effectively – Floor Tiles Cape Town

By Mar 25, 2020 No Comments

Learning how to remove tiles can seem like a daunting process. However, if you take the proper safety precautions and tackle the process with patience you are bound to succeed. To get you started we’ve included 7 simple steps that you can follow as a guideline for removing tiles.Floor Tiles Cape Town

1. Safety First

First things first, when removing tiles you need to keep safety at the forefront of your mind. Sometimes in order to remove the tiles, you will have to break them with a hammer and chisel. This could cause shards of tile to fly out from any direction. Needless to say, to protect yourself from these shards you need to take a few key precautions.

The main safety-related items you will need are a hardy pair of work gloves, a pair of safety goggles and a dust mask. While the gloves protect your hands from fly away shards, the safety goggles will protect your eyes. Then, the mask will help to filter out any tile dust that begins floating in the atmosphere as a result of the removal process.

If you don’t own any of these items, don’t stress. Safety goggles and work gloves are available at most hardware shops. Keep in mind that if you have allergies to dust or you have asthma, you may want to avoid tackling this project on your own. Your health is a top consideration.

2. Protect Your Surroundings

After you’ve looked after protecting yourself you should also protect your surroundings. Shards of tile can easily scuff or dent the other surfaces in the room.

Are you removing bathroom tiles? Then you should cover the tub, the sink and any other porcelain fixtures with a drop cloth. In the case of removing a tile wall, you should also cover up the floor. As you remove the tiles they may accidentally drop and shatter. This could scuff a hardwood, laminate or even tile floor.

However, if you take the time to cover up these surfaces in advance, you won’t need to worry about any stray shards causing damage.

Your home’s vents are responsible for circulating air throughout your home. Anything that gets trapped in them will circulate too.

The process of removing tiles can create a substantial amount of dust. If you don’t cover up your vents ahead of time this dust will likely get trapped inside them and then circulate throughout your home.

3. Remove Fixtures

If you are removing wall tiles you should first turn off the power to that room. Then, once this off you can unfasten outlet and light switch covers. Otherwise, these will prevent you from accessing and then removing the tiles beneath them.

Depending on where on the wall you are removing tiles from, you may also need to take off the trim. If you are removing floor tiles then you will definitely need to do this. If you do need to remove the trim, take your time. With patience, you should be able to effectively remove the trim without damaging it. That way you can reuse the trim again.

4. Scrape out the Grout

Scraping the grout out of your tiles can be a tricky process. This is especially true if you only plan to remove a few tiles or wall tiles in particular. When removing just a few tiles you will need to take special care not to damage any of the surrounding tiles, or else the project will be far more extensive than you had planned.

Removing grout from wall tiles is also trickier than removing it from floor tiles. The grout in wall tiles is usually much thinner than the grout on floor tiles. So, the process of scraping it out without damaging surrounding tiles is far more delicate.

The easiest way to scrape the grout out of these areas delicately is with a utility knife. Though using a utility knife will take longer than a power tool like a rotary grinder, it is far less likely to damage nearby tiles. In contrast, a rotary grinder can easily cut into a nearby tile if your hand slips.

No matter how you choose to remove the grout whether with a utility knife or a rotary grinder, keep the area clean. As you work, take breaks to vacuum up the dust that the grout removal process creates. This will ensure that you can continue to clearly see the area where you are working.

5. Remove the Tiles

Now that all of the grout is gone, it is time to remove those old tiles! For this stage of the removal process, the only tools you should need are a hammer and a chisel. Slide the chisel between the wall (or floor) and the tile. Then hit the end of the chisel with your hammer to apply pressure to it. This should loosen the tile from its adhesive. You may need to follow this process in a few spots along the backing of the tile to get it to completely loosen.

Once your first tile is out, continue chiseling and hammering along the newly exposed edges of the surrounding tiles. Repeat until all of the tiles that you would like to remove have been.

Are you still having difficulty removing that first tile? Are there a few lingering tiles that just won’t budge? Then you might just need to break them.

First, create a hole at the center of the tile with the hammer and chisel. Once this hole has been made continue to chisel away at the pieces of tile which remain along the edges. If you plan to keep some of the surrounding tiles be sure to take care during this step.Floor Tiles Cape Town

6. Remove the Adhesive

After the tiles have been completely removed you will now need to get rid of the tiling adhesive that is still attached to the wall or floor.

It is fairly easy to remove this by scraping the adhesive with a putty knife. Though this won’t remove everything it should help you get the majority of the surface even. Then you can sand any remaining areas that are uneven to level it out. This will be beneficial if you plan to re-tile the wall as it will ensure that the new layer of tiles is completely even.

If it is a floor that you are removing the tiles from, you may also need to get rid of the underlayment. Simply unscrew any screws which are keeping it attached to the subfloor. Once these are gone you should be able to simply lift it off. That being said, if your underlayment is still in good condition, then you can skip this step.

That’s it! Once you have reached this step you are all done removing your tiles. Now it’s time to hit the drawing board and plan out a new updated look for your home!Floor Tiles Cape Town

instagram default popup image round
Follow Me
502k 100k 3 month ago